TKC-KD系列可拆卸霍尔电流变送器是应用霍尔效应原理开发的新一代电流开云手机在线登录入口(中国)开云有限公司，能在电隔离条件下测量交流、脉冲以及各种不规则波形的电流。

　　TKC-KDseries current sensor is dismountable, which is a open loop device based on the measuring principle of the hall effect , with a galvanic isolation between primary and secondary circuit . It can measure AC pulse and various irregular wave current in electrical isolation conditions.

　　电参数 Electrical data(Ta=25℃±5℃)

　　应用 Applications

　　●变频调速系统

　　Variable speed drives

　　●不间断电源UPS

　　Uninterruptible power supplies (UPS)

　　●斩波器

　　Wave chopper

　　●电池电源

　　Battery supplied applications

　　●电焊机电源

　　Welding machine power

　　●通信电源

　　Telecommunication power

　　结构参数 Mechanical dimension(for reference only)

　　Remarks：

　　1. All dimensions are in mm.

　　2. General tolerance ±1mm.

　　使用说明 Directions for use

　　1. 当待测电流从变送器穿过，即可在输出端测得电压大小。(注意：错误的接线可能导致变送器损坏)

　　When the current will be measured goes through a transmitter, the voltage will be measured at the output end. (Note: The false wiring may result in the damage of the transmitter)

　　2. 变送器的输出幅度可根据用户需要进行适当调节。

　　Customs can adjust output amplitude of the transmitter by needs.

　　3. 可按用户需求定制不同额定输入电流和输出电压的变送器。

　　Custom design in the different rated input current and the output voltage are available.

　　4. 安装时，过流孔可拆开，使用方便。

　　When installing, the overflow hole can be disassembled, it’s easy to use.

　　执行标准 Standards

　　●UL94-V0.

　　●EN60947-1:2004

　　●IEC60950-1:2001

　　●EN50178:1998

　　●SJ 20790-2000

　　总体参数 General date

　　特性图 Characteristics chart